清洗机网是以生产、销售、维护超声波清洗机为一体的公司,近年来公司不断发展技术力量,创新生产技术手段,生产的产品销往全国各地,受到客户的一致好评,今天让大家了解一下超声波清洗机维修保养常见的问题。
超声波清洗机由超声波发生器和超声波换能器组成,超声波换能器是由压电陶瓷材料制造的夹芯式换能器,压电陶瓷材料在交变电场的作用下会产生机械振动。
超声波换能器常见问题
1 超声波振子受潮,可以用兆欧表检查与换能器相连接的插头,检查绝缘电阻值就可以判断基本情况,一般要求绝缘电阻大于5兆欧以上。如果达不到这个绝缘电阻值,一般是换能器受潮,可以把换能器整体(不包括喷塑外壳)放进烘箱设定100℃左右烘干3小时或者使用电吹风去潮至阻值正常为止。
2 换能器振子打火,陶瓷材料碎裂,可以用肉眼和兆欧表结合检查,一般作为应急处理的措施,可以把个别损坏的振子断开,不会影响到别的振子正常使用。
3 振子脱胶,我们的换能器是采用胶结,螺钉紧固双重保证工艺,在一般情况下不会出现这种情况。
4 不锈钢振动面穿孔,一般换能器满负荷使用10年以后可能会出现振动面穿孔的情况。 更多超声波清洗机信息请登录清洗机网:www.qingxijiw.com。
中译英:
Cleaning machine is the production, sales, maintenance of ultrasonic cleaning machine for the whole company, the development of the company technical force is constantly in recent years, technology innovation and production, products are sold throughout the country, by the customer the consistent high praise, let everyone know about ultrasonic cleaning machine repair and maintenance of common problems.
Ultrasonic cleaning machine is composed of an ultrasonic generator and an ultrasonic transducer, ultrasonic transducer is composed of piezoelectric sandwich transducer piezoelectric ceramic material, piezoelectric ceramic material can generate mechanical vibration under alternating electric field.
The common problems of ultrasonic transducers
1 ultrasonic vibrator damp, plug can be connected with check and transducer ohm meter trillion, check insulation resistance value can judge the basic situation, general requirements for insulation resistance of more than 5000000000000 euro or more. If not up to the value of insulation resistance, the general is a transducer damp, the transducer overall (not including spray enclosure) into the oven set at 100 ℃ drying 3 hours or use hair dryer to tide to the resistance of normal.
The 2 transducer flint, ceramic materials can be broken, with the naked eye and megger combined examination, generally as emergency measures, can the individual damage oscillator off, will not affect the normal use of the other oscillator.
The 3 oscillator degumming, the transducer is used to tighten the screws cemented, double assurance process, this situation will not arise in the general case.
4 stainless steel vibrating surface piercing, general transducer full load after 10 years may be the vibration face perforation. For more information please visit the ultrasonic cleaning machine cleaning machine: www.qingxijiw.com.
|